Part No. : NAS1153E2DP | Manufacturer : national aerospace standards | Item Name: screw close tolerance |
NSN: 5305-01-583-7374 (5305015837374) | CAGE Code: 80205 |
If you require part number NAS1153E2DP from National Aerospace Standards which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number NAS1153E2DP which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305015837374 and was produced under the CAGE Code 80205. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part NAS1153E2DP today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. NAS1153E2DP
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-583-7374 Item Description: SCREW,CLOSE TOLERANCE | 5305 | 015837374 | N | |||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
NAS1153E2DP | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.276 INCHES NOMINAL |
AASB | FASTENER LENGTH | 0.401 INCHES NOMINAL |
AASK | HEAD STYLE | FILLISTER COUNTERSUNK |
AASL | HEAD DIAMETER | 0.328 INCHES NOMINAL |
AASU | HEAD HEIGHT | 0.015 INCHES NOMINAL |
AAUR | GRIP DIAMETER | 0.189 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.070 INCHES MINIMUM FIRST HOLE AND 0.080 INCHES MAXIMUM FIRST HOLE |
ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
ANEE | GRIP LENGTH | 0.125 INCHES NOMINAL |
CMLP | THREAD QUANTITY PER INCH | 32 |
CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.284 INCHES NOMINAL FIRST HOLE |
FEAT | SPECIAL FEATURES | HAS TYPE II PLATING |
MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload