Part No. : NAS1154E10 | Manufacturer : national aerospace standards | Item Name: screw close tolerance |
NSN: 5305-01-515-0339 (5305015150339) | CAGE Code: 80205 |
If you require part number NAS1154E10 from National Aerospace Standards which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number NAS1154E10 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305015150339 and was produced under the CAGE Code 80205. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part NAS1154E10 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. NAS1154E10
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-515-0339 Item Description: SCREW,CLOSE TOLERANCE | 5305 | 015150339 | N | |||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
NAS1154E10 | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AHYM | Nominal Thread Diameter | 0.250 INCHES |
ANEE | Grip Length | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
AASK | Head Style | FLAT COUNTERSUNK |
AASA | Thread Length | 0.316 INCHES NOMINAL |
CQBC | Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH |
AASB | Fastener Length | 0.926 INCHES MINIMUM AND 0.956 INCHES MAXIMUM |
SFTT | Surface Treatment | PASSIVATE OVERALL |
ABQZ | Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
AASL | Head Diameter | 0.449 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
MRC | Decoded Requirement | Clear Text Reply |
MATT | Material | IRON ALLOY 660 OVERALL |
AAJF | Thread Direction | RIGHT-HAND |
AAUR | Grip Diameter | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
CMLP | Thread Quantity Per Inch | 28 |
THSD | Thread Series Designator | UNJF |
STDC | Surface Treatment Document And Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
AAJD | Thread Class | 3A |
MDCL | Material Document And Classification | AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload