Part No. : NAS1580V3T5D | Manufacturer : national aerospace standards | Item Name: screw close tolerance |
NSN: 5305-01-421-7555 (5305014217555) | CAGE Code: 80205 |
If you require part number NAS1580V3T5D from National Aerospace Standards which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number NAS1580V3T5D which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305014217555 and was produced under the CAGE Code 80205. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part NAS1580V3T5D today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. NAS1580V3T5D
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-421-7555 Item Description: Screw Close Tolerance | 5305 | 014217555 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Nas1580v3t5d | 5 | 1 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
CQBC | Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH |
AASK | Head Style | FLAT COUNTERSUNK |
AAWB | Shank Unthreaded Hole Diameter | 0.070 INCHES MINIMUM FIRST HOLE AND 0.080 INCHES MAXIMUM FIRST HOLE |
CMLP | Thread Quantity Per Inch | 32 |
CRZS | Distance From Head Largest Bearing Surface To Shank Hole Center | 0.559 INCHES NOMINAL FIRST HOLE |
AASB | Fastener Length | 0.660 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
MATT | Material | TITANIUM ALLOY UNS R56400 OVERALL |
AASA | Thread Length | 0.363 INCHES NOMINAL |
CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
AASL | Head Diameter | 0.339 INCHES MINIMUM AND 0.381 INCHES MAXIMUM |
ANEE | Grip Length | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
ZZZK | Specification/Standard Data | 80205-NAS1580 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
AAJF | Thread Direction | RIGHT-HAND |
ABQZ | Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
AHYM | Nominal Thread Diameter | 0.190 INCHES |
THSD | Thread Series Designator | UNJF |
AAUR | Grip Diameter | 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
MRC | Decoded Requirement | Clear Text Reply |
AAJD | Thread Class | 3A |
MDCL | Material Document And Classification | AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload