Part No. : NAS1790V4R5A | Manufacturer : national aerospace standards | Item Name: screw close tolerance |
NSN: 5305-01-591-8663 (5305015918663) | CAGE Code: 80205 |
If you require part number NAS1790V4R5A from National Aerospace Standards which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number NAS1790V4R5A which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305015918663 and was produced under the CAGE Code 80205. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part NAS1790V4R5A today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. NAS1790V4R5A
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.425 INCHES MAXIMUM |
AASB | FASTENER LENGTH | 0.7225 INCHES MINIMUM AND 0.7525 INCHES MAXIMUM |
AASK | HEAD STYLE | FLAT COUNTERSUNK |
AASL | HEAD DIAMETER | 0.465 INCHES MINIMUM AND 0.506 INCHES MAXIMUM |
AAUR | GRIP DIAMETER | 0.2485 NOMINAL MILS AND 0.2495 NOMINAL CENTIMETERS |
ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
AGAV | END ITEM IDENTIFICATION | A400M AIRBUS |
AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
ANEE | GRIP LENGTH | 0.3115 NOMINAL MILS AND 0.3235 NOMINAL CENTIMETERS |
CMLP | THREAD QUANTITY PER INCH | 28 |
CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT 100 DEGREE FLUSH HEAD |
MATT | MATERIAL | TITANIUM ALLOY UNS R56400 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload