Part No. : 146335PC5 | Manufacturer : navair and navsea managed | Item Name: gear bevel |
NSN: 3020-01-332-2753 (3020013322753) | CAGE Code: 10001 | FSC: 3020 Gear Pulley Sprocket and Transmission Chain |
If you require part number 146335PC5 from Navair And Navsea Managed which is described as a Gear Bevel component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 146335PC5 which is listed under the Federal Supply Class 3020 Gear Pulley Sprocket and Transmission Chain. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3020013322753 and was produced under the CAGE Code 10001. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 146335PC5 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 146335PC5
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3020-01-332-2753 Item Description: Gear Bevel | 3020 | 013322753 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
146335pc5 | 5 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAQL | BODY STYLE | PLAIN, SOLID |
AJLA | TEETH QUANTITY | 29 |
CWCD | NOMINAL OUTSIDE DIAMETER | 1.268 INCHES |
CWFR | NOMINAL OVERALL LENGTH | 0.500 INCHES |
CWNM | TOOTH DIRECTION | RIGHT |
CWQD | PITCH ANGLE | 47.0499 DEGREES |
CWRM | FACE NOMINAL WIDTH | 0.250 INCHES |
CWRS | BORE NOMINAL DIAMETER | 0.700 INCHES BOTH ENDS |
CWTR | HUB STYLE DESIGNATOR | 1 STEP SECOND END |
CWWH | END NOMINAL LENGTH | 0.197 INCHES SECOND END |
CWWN | END NOMINAL DIAMETER | 0.931 INCHES SECOND END |
CWWS | FIRST STEP NOMINAL LENGTH | 0.178 INCHES SECOND END |
CWXB | FIRST STEP NOMINAL DIAMETER | 1.090 INCHES SECOND END |
MATT | III MATERIAL | STEEL OVERALL |
STYL | STYLE DESIGNATOR | PERIPHERAL FACE, BACK HUB PROTRUDING |
CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.375 INCHES SECOND END |
ANTP | BORE STYLE | PLAIN BOTH ENDS |
CWMW | TEETH TYPE | STRAIGHT |
AGJS | PITCH DIAMETER | 1.2080 INCHES NOMINAL |
CWPP | PRESSURE ANGLE | 14.5000 DEGREES |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload