Part No. : L340003999 | Manufacturer : navair and navsea managed | Item Name: shaft shouldered |
NSN: 3040-01-116-1891 (3040011161891) | CAGE Code: 10001 | FSC: 3040 Miscellaneous Power Transmission Equipment |
If you require part number L340003999 from Navair And Navsea Managed which is described as a Shaft Shouldered component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number L340003999 which is listed under the Federal Supply Class 3040 Miscellaneous Power Transmission Equipment. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3040011161891 and was produced under the CAGE Code 10001. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part L340003999 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. L340003999
MRC | Criteria | Characteristic |
---|---|---|
AMFQ | Second End Distance From End To Groove | 0.494 INCHES NOMINAL |
AAHG | First End Groove Width | 0.2200 INCHES MINIMUM AND 0.2220 INCHES MAXIMUM |
AAHP | Second End Style | TWO CIRCULAR GROOVES |
AAHN | End Similarity | NOT IDENTICAL |
ATPC | Step Quantity | 1 |
ABHP | Overall Length | 1.300 INCHES NOMINAL |
CSYM | Surface Finish | 32.0 MICROINCHES |
AMFZ | Second End Diameter | 0.2180 INCHES MINIMUM AND 0.2220 INCHES MAXIMUM |
AMFC | First End Distance Between First And Second Groove Centers | 0.469 INCHES MINIMUM AND 0.479 INCHES MAXIMUM |
AAGZ | First End Style | TWO CIRCULAR GROOVES |
CSPY | Largest Step Diameter | 0.2180 INCHES MINIMUM AND 0.2220 INCHES MAXIMUM |
MDCL | Material Document And Classification | ASTM-A-582 ASSN STD SINGLE MATERIAL RESPONSE |
AMDL | First End Diameter | 0.2180 INCHES MINIMUM AND 0.2220 INCHES MAXIMUM |
AMCY | First End Distance From End To Groove | 0.062 INCHES NOMINAL |
AMHT | Second End Distance Between First And Second Groove Centers | 0.494 INCHES NOMINAL |
AAHW | Second End Groove Width | 0.0290 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM |
MRC | Decoded Requirement | Clear Text Reply |
MATT | Material | STEEL COMP 303 |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload