Part No. : 63A101B48 | Manufacturer : navair and navsea managed | Item Name: fastener pawl |
NSN: 5340-00-078-9652 (5340000789652) | CAGE Code: 10001 | FSC: 5340 Hardware Commercial |
If you require part number 63A101B48 from Navair And Navsea Managed which is described as a Fastener Pawl component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 63A101B48 which is listed under the Federal Supply Class 5340 Hardware Commercial. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5340000789652 and was produced under the CAGE Code 10001. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 63A101B48 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 63A101B48
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5340-00-078-9652 Item Description: Fastener Pawl | 5340 | 000789652 | 0 | P | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
63a101b48 | 6 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
ABGL | WIDTH | 0.875 INCHES NOMINAL |
ABMZ | DIAMETER | 1.375 INCHES NOMINAL |
ABRY | LENGTH | 1.307 INCHES NOMINAL |
ABTB | MOUNTING HOLE DIAMETER | 0.193 INCHES NOMINAL |
ABTH | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES | 1.250 INCHES NOMINAL |
AHRL | OPERATIONAL DIRECTION | RIGHT-HAND |
CJRT | PAWL TYPE | STRAIGHT |
CJRX | PAWL ACTUATION METHOD | KNOB |
CJRZ | PAWL LENGTH FROM ACTUATING SHAFT CENTER TO PAWL END | 1.000 INCHES NOMINAL |
CJSC | KNOB LENGTH | 0.500 INCHES NOMINAL |
CJSG | MOUNTING PLATE TO PAWL DISTANCE | 0.375 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
CZFU | PAWL SWING ANGLE | 90.0 DEGREES NOMINAL |
HGTH | HEIGHT | 1.750 INCHES NOMINAL |
MATT | MATERIAL | STEEL OVERALL |
SFTT | SURFACE TREATMENT | ZINC OVERALL |
STYL | STYLE DESIGNATOR | KNURLED |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload