Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : NAS500WDD416 | Manufacturer : naval aircraft standards | Item Name: nut spacer plate |
| NSN: 5310-00-595-9698 (5310005959698) | CAGE Code: 88827 |
If you require part number NAS500WDD416 from Naval Aircraft Standards which is described as a Nut Spacer Plate component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number NAS500WDD416 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5310005959698 and was produced under the CAGE Code 88827. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part NAS500WDD416 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-00-595-9698 Item PartTypeName: NUT SPACER,PLATE | 5310 | 005959698 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NAS500WDD416 | 6 | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABTB | MOUNTING HOLE DIAMETER | 0.102 INCHES MINIMUM AND 0.108 INCHES MAXIMUM |
| ACTA | NUT STYLE | PLATE NUT SPACER |
| ACVN | NUT LENGTH | 1.266 INCHES MINIMUM AND 1.296 INCHES MAXIMUM |
| ADAZ | THRU-HOLE DIAMETER | 0.300 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| ADEB | PLATE THICKNESS | 0.125 INCHES NOMINAL |
| ADEC | PLATE WIDTH | 0.641 INCHES MINIMUM AND 0.671 INCHES MAXIMUM |
| ADFP | NUT MOUNTING PROVISION | STRAIGHT HOLES |
| ADFU | MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| ADFW | DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.497 INCHES MINIMUM AND 0.503 INCHES MAXIMUM |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.998 INCHES MINIMUM AND 1.002 INCHES MAXIMUM |
| MATT | MATERIAL | ALUMINUM ALLOY 2014 OVERALL OR ALUMINUM ALLOY 2024 OVERALL OR ALUMINUM ALLOY 7075 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/3,T6 FED SPEC 1ST MATERIAL RESPONSE OVERALL OR QQ-A-250/5,T3 OR T4 FED SPEC 2ND MATERIAL RESPONSE OVERALL OR QQ-A-250/13,T6 FED SPEC 3RD MATERIAL RESPONSE OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions