Part No. : 4192 | Manufacturer : new hampshire ball bearings co | Item Name: bearing ball annular |
NSN: 3110-00-712-3106 (3110007123106) | CAGE Code: 83086 | FSC: 3110 Bearings Antifriction Unmounted |
If you require part number 4192 from New Hampshire Ball Bearings Co which is described as a Bearing Ball Annular component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 4192 which is listed under the Federal Supply Class 3110 Bearings Antifriction Unmounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3110007123106 and was produced under the CAGE Code 83086. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 4192 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 4192
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3110-00-712-3106 Item Description: Bearing Ball Annular | 3110 | 007123106 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
4192 | 2 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
ABXV | BORE DIAMETER | 0.1130 INCHES NOMINAL |
ADGA | OVERALL OUTSIDE DIAMETER | 0.4720 INCHES NOMINAL |
AGYE | SURFACE FINISH | GROUND |
AGYF | RETAINER FABRICATION METHOD | PRESSED |
AGZC | LOAD DIRECTION | RADIAL |
AGZD | BORE SHAPE | STRAIGHT |
AGZH | INTERNAL FIT-UP DESIGNATION | TIGHT |
FEAT | SPECIAL FEATURES | OD OF INNER RING FLANGED ON ONE SIDE 0.2440 IN. MAX FLANGE OD 0.0770 IN. FLANGE WIDTH,0.051 IN. WIDE BY 0.049 IN. DEEP SLOT IN OD OF OUTER RING,OD CORNERS AND SLOT CORNERS TO HAVE 0.016 IN. MAX RADIUS |
LBMA | LUBRICATION MATERIAL | GREASE |
LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | DOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE |
MATT | MATERIAL | STEEL OVERALL |
ABMK | OVERALL WIDTH | 0.2090 INCHES NOMINAL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload