Part No. : R3B36C193-2 | Alternate P/N : R3B36C1932 | Manufacturer : new hampshire ball bearings co |
Item Name: bearing ball duplex | NSN: 3110-01-181-4128 (3110011814128) | CAGE Code: 83086 |
FSC: 3110 Bearings Antifriction Unmounted |
If you require part number R3B36C193-2 from New Hampshire Ball Bearings Co which is described as a Bearing Ball Duplex component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number R3B36C193-2 which is listed under the Federal Supply Class 3110 Bearings Antifriction Unmounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3110011814128 and was produced under the CAGE Code 83086. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part R3B36C193-2 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. R3B36C193-2
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3110-01-181-4128 Item Description: Bearing Ball Duplex | 3110 | 011814128 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
R3b36c193-2 | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
ABMK | OVERALL WIDTH | 0.3074 INCHES MINIMUM AND 0.3124 INCHES MAXIMUM |
ABXV | BORE DIAMETER | 0.1873 INCHES MINIMUM AND 0.1874 INCHES MAXIMUM |
ADGA | OVERALL OUTSIDE DIAMETER | 0.4998 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
ADZG | LUBRICATION MATERIAL | OIL |
AGAV | END ITEM IDENTIFICATION | G AND S SECTION AGM65-D |
AGYE | SURFACE FINISH | GROUND |
AGYF | RETAINER FABRICATION METHOD | MACHINED |
AGZC | LOAD DIRECTION | RADIAL |
AKVV | INTERNAL CLEARANCE | 0.0017 INCHES NOMINAL RADIAL |
CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO. 7P |
FEAT | SPECIAL FEATURES | PRECAUTION SHALL BE TAKEN TO PREVENT CONTAMINATION OR SEPARATION OF MATCHED PAIRS |
LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE |
MATT | MATERIAL | STEEL COMP 410 RETAINER |
MATT | MATERIAL | STEEL COMP E52100 BALL |
MATT | MATERIAL | STEEL COMP E52100 INNER RING |
MATT | MATERIAL | STEEL COMP E52100 OUTER RING |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 410 ASSN STD SINGLE MATERIAL RESPONSE RETAINER |
STYL | STYLE DESIGNATOR | COUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload