Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : MCP M6X20 304 | Alternate P/N : MCPM6X20304 | Manufacturer : newcastle hi tensile bolt co pty ltd |
| Item Name: screw machine | NSN: 5305-01-390-3407 (5305013903407) | CAGE Code: Z1Q26 |
| FSC: 5305 Screws |
If you require part number MCP M6X20 304 from Newcastle Hi Tensile Bolt Co Pty Ltd which is described as a Screw Machine component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number MCP M6X20 304 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305013903407 and was produced under the CAGE Code Z1Q26. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part MCP M6X20 304 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-390-3407 Item PartTypeName: SCREW,MACHINE | 5305 | 013903407 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MCP M6X20 304 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASL | HEAD DIAMETER | 10.57 MILLIMETERS MINIMUM AND 11.00 MILLIMETERS MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| CQQR | THREAD PITCH IN MILLIMETERS | 1.0 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| THSD | THREAD SERIES DESIGNATOR | M |
| AASB | FASTENER LENGTH | 20.0 MILLIMETERS NOMINAL |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AHYM | NOMINAL THREAD DIAMETER | 6.0 MILLIMETERS |
| CQWR | EXTERNAL THREAD TOLERANCE CLASS | 6G |
| CYAU | SCREW MATERIAL | STEEL CORROSION RESISTING |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | DIN 267 PART 11 NATIONAL SPEC SINGLE MATERIAL RESPONSE |
| AASA | THREAD LENGTH | 15.0 MILLIMETERS MINIMUM |
| CRSQ | COUNTERSINK ANGLE | 90.0 DEGREES MINIMUM AND 92.0 DEGREES MAXIMUM |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions