Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : GW10F-7A | Alternate P/N : GW10F7A | Manufacturer : northrop grumman systems corporation |
| Item Name: washer recessed | NSN: 5310-01-064-3626 (5310010643626) | CAGE Code: 26512 |
| FSC: 5310 Nuts and Washers |
If you require part number GW10F-7A from Northrop Grumman Systems Corporation which is described as a Washer Recessed component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number GW10F-7A which is listed under the Federal Supply Class 5310 Nuts and Washers. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5310010643626 and was produced under the CAGE Code 26512. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part GW10F-7A today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-01-064-3626 Item PartTypeName: WASHER,RECESSED | 5310 | 010643626 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| GW10F-7A | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUB | HOLE DIAMETER | 0.438 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| ABKV | OUTSIDE DIAMETER | 0.677 INCHES MINIMUM AND 0.697 INCHES MAXIMUM |
| ABMD | RECESS DIAMETER | 0.498 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| ABPX | MATERIAL THICKNESS | 0.070 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |
| CQBC | MINIMUM TENSILE STRENGTH | 150000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 33.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM |
| CSTM | RECESS ANGLE | 90.0 DEGREES NOMINAL |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
| FEAT | SPECIAL FEATURES | CHAMFER 45 DEG BY 0.030 IN. MIN,0.040 IN. MAX ON OD RECESSED SIDE |
| MATT | MATERIAL | STEEL COMP 4130 OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | RECESSED |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions