Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : GS540E2 | Manufacturer : northrop grumman systems corporation | Item Name: nut spacer plate |
| NSN: 5310-00-151-8750 (5310001518750) | CAGE Code: 26512 |
If you require part number GS540E2 from Northrop Grumman Systems Corporation which is described as a Nut Spacer Plate component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number GS540E2 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5310001518750 and was produced under the CAGE Code 26512. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part GS540E2 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-00-151-8750 Item PartTypeName: NUT SPACER,PLATE | 5310 | 001518750 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| GS540E2 | 6 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABTB | MOUNTING HOLE DIAMETER | 0.096 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| ACTA | NUT STYLE | PLATE NUT SPACER |
| ACVN | NUT LENGTH | 1.105 INCHES MINIMUM AND 1.135 INCHES MAXIMUM |
| ADAZ | THRU-HOLE DIAMETER | 0.410 INCHES MINIMUM AND 0.430 INCHES MAXIMUM |
| ADEB | PLATE THICKNESS | 0.060 INCHES MINIMUM AND 0.066 INCHES MAXIMUM |
| ADEC | PLATE WIDTH | 0.605 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| ADFP | NUT MOUNTING PROVISION | STRAIGHT HOLES |
| ADFU | MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| ADFW | DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.437 INCHES NOMINAL |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions