Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 2-43345-1 | Alternate P/N : 2433451 | Manufacturer : northrop grumman technical services inc |
| Item Name: nut plain hexagon | NSN: 5310-00-770-3181 (5310007703181) | CAGE Code: 0JRC1 |
| FSC: 5310 Nuts and Washers |
If you require part number 2-43345-1 from Northrop Grumman Technical Services Inc which is described as a Nut Plain Hexagon component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 2-43345-1 which is listed under the Federal Supply Class 5310 Nuts and Washers. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5310007703181 and was produced under the CAGE Code 0JRC1. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 2-43345-1 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-00-770-3181 Item PartTypeName: NUT,PLAIN,HEXAGON | 5310 | 007703181 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 2-43345-1 | C | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ADEA | NUT HEIGHT | 0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM |
| AGGP | DRILLED HOLE DIAMETER | 0.040 INCHES NOMINAL |
| ALET | HOLE TYPE AND QUANTITY | 3 DRILLED |
| BZRR | THREAD SERIES | UNEF |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION B |
| CRTM | BEARING SURFACE TYPE | FLAT |
| MATT | MATERIAL | STEEL COMP 4130 OVERALL |
| ACTA | NUT STYLE | HEXAGON |
| AGAV | END ITEM IDENTIFICATION | W/S AIRCRAFT,T-38 |
| ASDB | WIDTH ACROSS FLATS | 1.900 INCHES NOMINAL |
| CQJX | NOMINAL THREAD SIZE | 1.688 INCHES |
| CRSQ | COUNTERSINK ANGLE | 110.0 DEGREES NOMINAL BOTH ENDS |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-T-6736,COND N MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions