Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : J-3-1-12 | Alternate P/N : J3112 | Manufacturer : nylok corporation |
| Item Name: nut self locking round | NSN: 5310-01-332-0895 (5310013320895) | CAGE Code: 26233 |
| FSC: 5310 Nuts and Washers |
If you require part number J-3-1-12 from Nylok Corporation which is described as a Nut Self Locking Round component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number J-3-1-12 which is listed under the Federal Supply Class 5310 Nuts and Washers. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5310013320895 and was produced under the CAGE Code 26233. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part J-3-1-12 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-01-332-0895 Item PartTypeName: NUT,SELF-LOCKING,ROUND | 5310 | 013320895 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| J-3-2-7 | 6 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUM | LOCKING FEATURE | PREVAILING TORQUE WITH NONMETALLIC INSERT |
| ABQU | DRIVE POINT DEPTH | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| ADBG | NUT THICKNESS | 0.584 INCHES MINIMUM AND 0.604 INCHES MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 45.0 DEGREES MINIMUM BOTH ENDS AND 60.0 DEGREES MAXIMUM BOTH ENDS |
| AAJE | THREAD PITCH DIAMETERS | 2.8789 TO 2.8845 INCHES |
| ACTA | NUT STYLE | ROUND |
| ACTD | NUT DIAMETER | 3.605 INCHES MINIMUM AND 3.635 INCHES MAXIMUM |
| ADBH | DRIVE POINT WIDTH | 0.360 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| ADBM | DRIVE POINT QUANTITY | 4 |
| MATT | MATERIAL | STEEL COMP 1035 OVERALL |
| CMLP | THREAD QUANTITY PER INCH | 12 |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions