Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 2D3-00293 IT NO 5 | Alternate P/N : 2D300293ITNO5 | Manufacturer : oldenburg group incorporated |
| Item Name: gearshaft spur | NSN: 3040-01-449-0218 (3040014490218) | CAGE Code: 34712 |
| FSC: 3040 Miscellaneous Power Transmission Equipment |
If you require part number 2D3-00293 IT NO 5 from Oldenburg Group Incorporated which is described as a Gearshaft Spur component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 2D3-00293 IT NO 5 which is listed under the Federal Supply Class 3040 Miscellaneous Power Transmission Equipment. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3040014490218 and was produced under the CAGE Code 34712. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 2D3-00293 IT NO 5 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-01-449-0218 Item PartTypeName: GEARSHAFT,SPUR | 3040 | 014490218 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 2D1-03978 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 16.250 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | GSTRATEGIC SEALIFT CONVERSION SHIPS CLASS |
| AJLA | TEETH QUANTITY | 25 |
| AJWS | GEAR OUTSIDE DIAMETER | 8.988 INCHES MINIMUM AND 9.000 INCHES MAXIMUM |
| ANJS | SHAFT END TYPE | PLAIN AND PLAIN |
| AQGH | DIAMETRAL PITCH | 3 |
| AQPL | FACE WIDTH | 6.250 INCHES NOMINAL |
| CRSJ | SHAFT TYPE | SHOULDERED |
| CWPP | PRESSURE ANGLE | 25.0000 DEGREES |
| CYEQ | SHAFT MATERIAL | STEEL COMP 4820 |
| CYER | GEAR MATERIAL | STEEL COMP 4820 |
| CYES | HARDNESS RATING AND LOCATION | 55.0 ROCKWELL C MINIMUM TEETH AND 60.0 ROCKWELL C MAXIMUM TEETH |
| CYET | SHAFT LARGEST DIAMETER | 4.750 INCHES NOMINAL |
| CYEU | GEAR LOCATION ON SHAFT | OFF CENTER BETWEEN ENDS OF SHAFT |
| CYEV | LONGER SHAFT SEGMENT LENGTH | 4.000 INCHES NOMINAL |
| CYEW | SHAFT END SIZE | 3.545 INCHES AND 3.545 INCHES |
| FEAT | SPECIAL FEATURES | SPHERICAL ROLLER BEARING ON EACH SHAFT END; KEYWAY LOCATED IN LARGEST SHAFT OD 1.25 WIDE BY .625 DEEP |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions