51H32 by Parker Hannifin Corporation With NSN 4730-00-116-5229

Part No. : 51H32	Manufacturer : parker hannifin corporation	Item Name: flange pipe swivel retaining
NSN: 4730-00-116-5229 (4730001165229)	CAGE Code: 98441	FSC: 4730 Hose Pipe Tube Lubrication and Railing Fittings

If you require part number 51H32 from Parker Hannifin Corporation which is described as a Flange Pipe Swivel Retaining component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 51H32 which is listed under the Federal Supply Class 4730 Hose Pipe Tube Lubrication and Railing Fittings. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 4730001165229 and was produced under the CAGE Code 98441. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 51H32 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.

Please Fill Out Below Form for 51H32

Required fields compulsory *

Contact Information

Note : We will not share your information to any third parties.

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms & Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number 51H32 with NSN 4730-00-116-5229, 4730-00-116-5229

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
4730-00-116-5229 Item PartTypeName: FLANGE,PIPE,SWIVEL RETAINING	4730	001165229	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
M52525/16-32G	C	2	2

Characteristics Data of NSN 4730-00-116-5229, 4730001165229

MRC	Criteria	Characteristic
ABMD	RECESS DIAMETER	2.844 INCHES NOMINAL
ABMH	RECESS DEPTH	0.350 INCHES MINIMUM AND 0.360 INCHES MAXIMUM
ABNM	THICKNESS	0.750 INCHES NOMINAL
ACSV	TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED	2.000 INCHES NOMINAL
ADUY	CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	1.620 INCHES NOMINAL
ADUZ	CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	3.062 INCHES NOMINAL
ADVD	OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.469 INCHES NOMINAL
ADVE	OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	1.050 INCHES NOMINAL
AECS	BOLT HOLE QUANTITY	4
AFQN	FLANGE LENGTH	4.000 INCHES NOMINAL
AGAV	END ITEM IDENTIFICATION	HYDRAULIC SYSTEMS TEST AND REPAIR UNIT
AGFF	FLANGE WIDTH	3.720 INCHES NOMINAL
AHNX	BOLT HOLE DIAMETER	0.531 INCHES NOMINAL
AJEM	FLANGE SECTION STYLE	PLAIN RECESSED FACE
AKWE	FACE SEATING SURFACE CONDITION	GROUND
CQCJ	MAXIMUM OPERATING PRESSURE AND MEDIA FOR WHICH DESIGNED	3000.0 POUNDS PER SQUARE INCH ANY ACCEPTABLE
FEAT	SPECIAL FEATURES	SPLIT FLANGE TYPE
MATT	MATERIAL	STEEL
SFTT	SURFACE TREATMENT	ZINC
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-Z-325,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE
STYL	STYLE DESIGNATOR	RECTANGULAR,WITH BOLT HOLES

Related NSN Componets for 51H32

Part 51H32 With Different Manufacturers

51H32

OTHER

RFQ

If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.

Upload

We are proud to supply every branch of the United States military

Top NSN Parts

view all

Leading NSN Parts Manufacturer