Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : F49-0-53079 | Alternate P/N : F49053079 | Manufacturer : parker hannifin corporation |
| Item Name: jig drill aircraft | NSN: 4920-01-445-4846 (4920014454846) | CAGE Code: 6T459 |
| FSC: 4920 Aircraft Maintenance And Repair Shop Specialized Equipment |
If you require part number F49-0-53079 from Parker Hannifin Corporation which is described as a Jig Drill Aircraft component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number F49-0-53079 which is listed under the Federal Supply Class 4920 Aircraft Maintenance And Repair Shop Specialized Equipment. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 4920014454846 and was produced under the CAGE Code 6T459. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part F49-0-53079 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| MRC | Criteria | Characteristic |
|---|---|---|
| SR-5 | THE MANUFACTURERS DATA | |
| CXRQ | NOMINAL OVERALL WIDTH | 8.000 INCHES |
| SR-5 | MANUFACTURERS CODE | 6T459 |
| CYAG | NOMINAL OVERALL HEIGHT | 10.000 INCHES |
| SR-5 | DESIGN CONTROL REFERENCE | F49-0-53079 |
| RDAL | REFERENCE DATA AND LITERATURE | CONTRACT F33657-90-C-0071, CLIN 0014, ELIN C005, C-130H, FY'91 AIR RESERVE COMPONENT PECULIARS AND DATA; SER NO. 80-91-0046 |
| AGAV | III END ITEM IDENTIFICATION | C-130H; T56 ENGINE; JET ENGINE AIR TURBINE STARTER P/N 36E165-2QC |
| CWFR | NOMINAL OVERALL LENGTH | 12.000 INCHES |
| FTLD | FUNCTIONAL DESCRIPTION | THE DRILL JIG IS MADE OF AN ALUMINUM ALLOY WELDED STAND ASSY WITH KNURLED THUMB SCREWS FOR CLAMPING PURPOSES.HAS HORIZONTAL AND VERTICAL WELDED PLATES WITH APPROPRIATELY SIZED CUTOUT TORECEIVE THE ROTOR. JIG WILL SIT ON A FLAT WORK BENCH FOR HOLDING THE TURBINEROTOR FOR BALANCING PURPOSES. |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions