Part No. : 204-040-602-5 | Alternate P/N : 2040406025 | Manufacturer : precision gear incorporated |
Item Name: shaft shouldered | NSN: 3040-00-765-2408 (3040007652408) | CAGE Code: 21540 |
FSC: 3040 Miscellaneous Power Transmission Equipment |
If you require part number 204-040-602-5 from Precision Gear Incorporated which is described as a Shaft Shouldered component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 204-040-602-5 which is listed under the Federal Supply Class 3040 Miscellaneous Power Transmission Equipment. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3040007652408 and was produced under the CAGE Code 21540. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 204-040-602-5 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 204-040-602-5
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3040-00-765-2408 Item Description: Shaft Shouldered | 3040 | 007652408 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
204-040-602-5 | 5 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAGZ | FIRST END STYLE | SPLINED (INVOLUTE) |
AAHN | END SIMILARITY | IDENTICAL |
ABHP | OVERALL LENGTH | 1.730 INCHES MINIMUM AND 1.740 INCHES MAXIMUM |
AMDL | FIRST END DIAMETER | 1.2610 INCHES MINIMUM AND 1.2660 INCHES MAXIMUM |
AMDM | FIRST END SPLINE LENGTH | 0.500 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
AMDN | FIRST END SPLINE MINOR DIAMETER | 1.1100 INCHES MINIMUM AND 1.1200 INCHES MAXIMUM |
AMDP | FIRST END SPLINE MAJOR DIAMETER | 1.2610 INCHES MINIMUM AND 1.2660 INCHES MAXIMUM |
AMDS | FIRST END PITCH DIAMETER | 1.2000 INCHES NOMINAL |
ATPC | STEP QUANTITY | 3 |
BDSQ | FIRST END SPLINE QUANTITY | 24 |
CSPY | LARGEST STEP DIAMETER | 1.377 INCHES MINIMUM AND 1.378 INCHES MAXIMUM |
CSYM | SURFACE FINISH | 32.0 MICROINCHES |
MATT | MATERIAL | STEEL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6260 ASSN STD SINGLE MATERIAL RESPONSE |
AMDR | FIRST END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL |
ZZZV | FSC APPLICATION DATA | DRIVE SHAFT,ROTOR,HELICOPTER |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload