Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 13084019 | Manufacturer : program manager advanced attack | Item Name: bearing ball duplex |
| NSN: 3110-01-186-5522 (3110011865522) | CAGE Code: 58260 | FSC: 3110 Bearings Antifriction Unmounted |
If you require part number 13084019 from Program Manager Advanced Attack which is described as a Bearing Ball Duplex component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 13084019 which is listed under the Federal Supply Class 3110 Bearings Antifriction Unmounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3110011865522 and was produced under the CAGE Code 58260. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 13084019 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-186-5522 Item PartTypeName: BEARING,BALL,DUPLEX | 3110 | 011865522 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| ML50K-654 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 0.8350 INCHES MINIMUM AND 0.8450 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 8.9993 INCHES MINIMUM AND 9.0000 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 9.7493 INCHES MINIMUM AND 9.7500 INCHES MAXIMUM |
| ADZG | LUBRICATION MATERIAL | OIL |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | LIPS TURNED INWARDLY |
| AGZC | LOAD DIRECTION | ANGULAR |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.3 |
| CTHQ | BEARING PRELOAD RATING | 720.0 POUNDS MINIMUM AND 880.0 POUNDS MAXIMUM |
| CTHY | CONTACT ANGLE | 30.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | PASSIVATE,QQ-P-35,RINGS AND BALLS 20 DROPS OF SPECIFIED LUBRICANT FROMNO. 26 HYPODERMIC NEEDLE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | PLASTIC PHENOLIC RETAINER |
| MATT | MATERIAL | RUBBER CHLOROPRENE CLASS CR SEAL |
| MATT | MATERIAL | STEEL COMP 440C BALL |
| MATT | MATERIAL | STEEL COMP 440C INNER RING |
| MATT | MATERIAL | STEEL COMP 440C OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-79,FORM T,TYPE FBE MIL SPEC SINGLE MATERIAL RESPONSE RETAINER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-R-6855,CLASS 2,TYPE A MIL SPEC SINGLE MATERIAL RESPONSE SEAL |
| STYL | STYLE DESIGNATOR | COUNTERBORED OUTER RINGS,NON-SEPARABLE,BACK TO BACK MOUNTING |
| ZZZK | SPECIFICATION/STANDARD DATA | 58260-13084019 GOVERNMENT SPECIFICATION |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions