Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : S19-100005 | Alternate P/N : S19100005 | Manufacturer : psi peripheral support |
| Item Name: capacitor fixed mica dielectric | NSN: 5910-00-068-9296 (5910000689296) | CAGE Code: 48294 |
| FSC: 5910 Capacitors |
If you require part number S19-100005 from Psi Peripheral Support which is described as a Capacitor Fixed Mica Dielectric component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number S19-100005 which is listed under the Federal Supply Class 5910 Capacitors. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5910000689296 and was produced under the CAGE Code 48294. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part S19-100005 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5910-00-068-9296 Item PartTypeName: CAPACITOR,FIXED,MICA DIELECTRIC | 5910 | 000689296 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 942339-53 | 2 | 2 | 1 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CRDN | TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS | 0.0 TO 70.0 SINGLE SECTION |
| CRTP | TOLERANCE RANGE PER SECTION | -5.00 TO 5.00 PERCENT SINGLE SECTION |
| CWJK | CASE MATERIAL | PLASTIC |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | 100000.0 MEGOHMS |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.2500 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| TEST | TEST DATA DOCUMENT | 94580-942339-53 DRAWING THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC. EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DR |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| AAQL | BODY STYLE | W/O MTG FACILITIES TERMINAL S) ON ONE SURFACE |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 1.250 INCHES MINIMUM |
| ADAQ | BODY LENGTH | 0.650 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.520 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.220 INCHES MAXIMUM |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.313 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| AEBT | TERMINAL DIAMETER | 0.032 INCHES NOMINAL |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE S) |
| CQBQ | CAPACITANCE VALUE PER SECTION | 1000.000 PICOFARADS SINGLE SECTION |
| CQJJ | NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 500.0 DC SINGLE SECTION |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions