Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : M28009-409 | Alternate P/N : M28009409 | Manufacturer : radionics technologies inc |
| Item Name: screw machine | NSN: 5305-00-764-0068 (5305007640068) | CAGE Code: 50097 |
| FSC: 5305 Screws |
If you require part number M28009-409 from Radionics Technologies Inc which is described as a Screw Machine component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number M28009-409 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305007640068 and was produced under the CAGE Code 50097. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part M28009-409 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-764-0068 Item PartTypeName: SCREW,MACHINE | 5305 | 007640068 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 8-32UNCX1-2FLH8 2 | 3 | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | 0.500 INCHES NOMINAL |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| CYAU | SCREW MATERIAL | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES |
| THSD | THREAD SERIES DESIGNATOR | UNC |
| AAJD | THREAD CLASS | 2A |
| AASA | THREAD LENGTH | 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | MRAP-M-ATV W/CS13 POP AND SNE |
| AHYM | NOMINAL THREAD DIAMETER | 0.164 INCHES |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions