Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 1301808 | Manufacturer : randall co inc | Item Name: nut plain hexagon |
| NSN: 5310-00-551-7738 (5310005517738) | CAGE Code: 99470 | FSC: 5310 Nuts and Washers |
If you require part number 1301808 from Randall Co Inc which is described as a Nut Plain Hexagon component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 1301808 which is listed under the Federal Supply Class 5310 Nuts and Washers. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5310005517738 and was produced under the CAGE Code 99470. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 1301808 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-00-551-7738 Item PartTypeName: NUT,PLAIN,HEXAGON | 5310 | 005517738 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | 0 | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1301808 | 2 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAWY | COUNTERBORE DIAMETER | 0.646 INCHES MINIMUM NUT AND 0.666 INCHES MAXIMUM NUT |
| ACTA | NUT STYLE | HEXAGON |
| ADEA | NUT HEIGHT | 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM |
| AGGP | DRILLED HOLE DIAMETER | 0.062 INCHES NOMINAL |
| ALET | HOLE TYPE AND QUANTITY | 2 DRILLED |
| ASDB | WIDTH ACROSS FLATS | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| BZRR | THREAD SERIES | UNF |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQJX | NOMINAL THREAD SIZE | 0.625 INCHES |
| CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION B |
| CRSQ | COUNTERSINK ANGLE | 109.5 DEGREES MINIMUM NUT AND 110.5 DEGREES MAXIMUM NUT |
| CRTM | BEARING SURFACE TYPE | CHAMFERED OR WASHER FACED |
| CSXL | BEARING SURFACE FINISH | 125.0 MICROINCHES |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-268 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | ANODIZE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions