Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 5025-682 | Alternate P/N : 5025682 | Manufacturer : raytheon company |
| Item Name: resistor variable wire wound non | NSN: 5905-00-890-4348 (5905008904348) | CAGE Code: 05869 |
| FSC: 5905 Resistors |
If you require part number 5025-682 from Raytheon Company which is described as a Resistor Variable Wire Wound Non component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 5025-682 which is listed under the Federal Supply Class 5905 Resistors. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5905008904348 and was produced under the CAGE Code 05869. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 5025-682 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-890-4348 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 008904348 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | U | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 025-002823 | 2 | 2 | 7 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 0.171 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| ABKW | OVERALL HEIGHT | 0.500 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.070 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.030 INCHES NOMINAL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
| APXH | TERMINAL LOCATION | REAR END |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 9000.0 NOMINAL |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.5 FREE AIR SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| ABHP | OVERALL LENGTH | 0.728 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 0.190 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.083 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 0.527 INCHES MINIMUM AND 0.533 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.190 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 0.500 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.562 INCHES NOMINAL |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 1.0 KILOHMS SINGLE SECTION |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 26916-025-002823 DRAWING THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC. EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING D |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions