Part No. : S7P4DB8514 | Manufacturer : rbc aircraft products inc | Item Name: bearing ball duplex |
NSN: 3110-00-059-3874 (3110000593874) | CAGE Code: 3NPS1 | FSC: 3110 Bearings Antifriction Unmounted |
If you require part number S7P4DB8514 from Rbc Aircraft Products Inc which is described as a Bearing Ball Duplex component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number S7P4DB8514 which is listed under the Federal Supply Class 3110 Bearings Antifriction Unmounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3110000593874 and was produced under the CAGE Code 3NPS1. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part S7P4DB8514 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. S7P4DB8514
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3110-00-059-3874 Item Description: Bearing Ball Duplex | 3110 | 000593874 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
S7p4db8514 | 2 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
ABMK | OVERALL WIDTH | 0.8020 INCHES MINIMUM AND 0.8120 INCHES MAXIMUM |
ABXV | BORE DIAMETER | 0.6247 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
ADGA | OVERALL OUTSIDE DIAMETER | 1.3745 INCHES MINIMUM AND 1.3750 INCHES MAXIMUM |
ADZG | LUBRICATION MATERIAL | GREASE |
AGYE | SURFACE FINISH | GROUND |
AGYF | RETAINER FABRICATION METHOD | PRESSED |
AGYJ | SEAL QUANTITY | 2 |
AGYW | BEARING SEAL TYPE | CONTACT |
AGZC | LOAD DIRECTION | RADIAL |
AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.1 |
FEAT | SPECIAL FEATURES | FILL 100 PCT WITH SPECIFIED LUBRICANT |
LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-25537 MIL SPEC SINGLE MATERIAL RESPONSE |
MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
MATT | MATERIAL | STEEL BALL |
MATT | MATERIAL | STEEL INNER RING |
MATT | MATERIAL | STEEL OUTER RING |
MATT | MATERIAL | STEEL SNAP RING |
STYL | STYLE DESIGNATOR | SHOULDERED INNER RING, NON-SEPARABLE, FACE TO FACE MOUNTING |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload