Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 3MFRA334CFA21 | Manufacturer : reed and prince mfg co | Item Name: screw machine |
| NSN: 5305-00-882-1106 (5305008821106) | CAGE Code: 77545 | FSC: 5305 Screws |
If you require part number 3MFRA334CFA21 from Reed And Prince Mfg Co which is described as a Screw Machine component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 3MFRA334CFA21 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305008821106 and was produced under the CAGE Code 77545. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 3MFRA334CFA21 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-882-1106 Item PartTypeName: SCREW,MACHINE | 5305 | 008821106 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3MA334CFA21 | C | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AASA | THREAD LENGTH | 0.469 INCHES MINIMUM |
| AASB | FASTENER LENGTH | 2.157 INCHES NOMINAL |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE II |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| CYAU | SCREW MATERIAL | STEEL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions