Part No. : 11845V5-13A | Alternate P/N : 11845V513A | Manufacturer : reid products inc |
Item Name: screw close tolerance | NSN: 5305-01-481-9438 (5305014819438) | CAGE Code: 59563 |
FSC: 5305 Screws |
If you require part number 11845V5-13A from Reid Products Inc which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 11845V5-13A which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305014819438 and was produced under the CAGE Code 59563. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 11845V5-13A today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 11845V5-13A
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-481-9438 Item Description: Screw Close Tolerance | 5305 | 014819438 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
11845v5-13a | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.469 INCHES NOMINAL |
AASB | FASTENER LENGTH | 1.282 INCHES NOMINAL |
AASK | HEAD STYLE | FLAT COUNTERSUNK |
AASL | HEAD DIAMETER | 0.438 INCHES MINIMUM AND 0.445 INCHES MAXIMUM |
AAUJ | SPLINE MAJOR DIAMETER | 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
AAUR | GRIP DIAMETER | 0.312 INCHES NOMINAL |
AAVA | POINT DIAMETER | 0.469 INCHES NOMINAL |
ABQJ | POINT STYLE | FLAT |
ABQZ | INTERNAL DRIVE STYLE | TORX |
AGAV | END ITEM IDENTIFICATION | F/A-18E, F/A-18F |
AHYM | NOMINAL THREAD DIAMETER | 0.313 INCHES |
ANEE | GRIP LENGTH | 0.813 INCHES NOMINAL |
CMLP | THREAD QUANTITY PER INCH | 24 |
CQBC | MINIMUM TENSILE STRENGTH | 4230 POUNDS PER SQUARE INCH |
CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS - PH13-8MO (125 KSI SHEAR), INCONEL 718 (125 KSI SHEAR), 6AL-4V TITANIUM (95 KSI SHEAR). |
MATT | MATERIAL | TITANIUM OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload