Part No. : 11825C6-5A | Alternate P/N : 11825C65A | Manufacturer : reid products inc |
Item Name: screw close tolerance | NSN: 5305-01-512-8300 (5305015128300) | CAGE Code: 59563 |
FSC: 5305 Screws |
If you require part number 11825C6-5A from Reid Products Inc which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 11825C6-5A which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305015128300 and was produced under the CAGE Code 59563. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 11825C6-5A today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 11825C6-5A
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-512-8300 Item Description: Screw Close Tolerance | 5305 | 015128300 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
11825c6-5a | 5 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.578 INCHES NOMINAL |
AASB | FASTENER LENGTH | 0.876 INCHES MINIMUM AND 0.906 INCHES MAXIMUM |
AASK | HEAD STYLE | FLAT COUNTERSUNK |
AASL | HEAD DIAMETER | 0.524 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
AAUH | SPLINE MINOR DIAMETER | 0.1570 INCHES MINIMUM AND 0.1600 INCHES MAXIMUM |
AAUJ | SPLINE MAJOR DIAMETER | 0.2195 INCHES MINIMUM AND 0.2225 INCHES MAXIMUM |
AAUR | GRIP DIAMETER | 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
ABQZ | INTERNAL DRIVE STYLE | TORX |
AGAV | END ITEM IDENTIFICATION | F18 E/F |
AHYM | NOMINAL THREAD DIAMETER | 0.375 INCHES |
ANEE | GRIP LENGTH | 0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM |
CMLP | THREAD QUANTITY PER INCH | 24 |
CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,100 DEGREE REDUCED HEAD,GEAR DRIVE RECESS-PH13-8MO (125 KSI SHEAR), INCONEL 718 (125 KSI SHEAR), 6AL-4V TITANIUM (95 KSI SHEAR) |
MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload