Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : DREM4-334 | Alternate P/N : DREM4334 | Manufacturer : research designing service |
| Item Name: bearing plain rod end | NSN: 3120-00-809-6399 (3120008096399) | CAGE Code: 81367 |
| FSC: 3120 Bearings Plain Unmounted |
If you require part number DREM4-334 from Research Designing Service which is described as a Bearing Plain Rod End component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number DREM4-334 which is listed under the Federal Supply Class 3120 Bearings Plain Unmounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3120008096399 and was produced under the CAGE Code 81367. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part DREM4-334 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| MRC | Criteria | Characteristic |
|---|---|---|
| AAZE | SHANK DIAMETER | 0.4989 INCHES MINIMUM AND 0.4994 INCHES MAXIMUM |
| AAZF | SHANK STYLE | HOLLOW, UNTHREADED |
| AGGF | OUTER MEMBER OUTSIDE DIAMETER | 0.7400 INCHES MINIMUM AND 0.7850 INCHES MAXIMUM |
| AGGH | OUTER MEMBER WIDTH | 0.2760 INCHES MINIMUM AND 0.2860 INCHES MAXIMUM |
| AGHC | SHANK INSIDE DIAMETER | 0.2460 INCHES MINIMUM AND 0.2540 INCHES MAXIMUM |
| AGHD | SHANK HOLE LENGTH | 1.0000 INCHES NOMINAL |
| CQFM | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM ROD END BODY |
| MATT | MATERIAL | STEEL COMP 440C INNER MEMBER |
| TEST | TEST DATA DOCUMENT | 81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| ABXV | BORE DIAMETER | 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| AGKP | STATIC RADIAL LOAD RATING | 2400 POUNDS |
| STYL | STYLE DESIGNATOR | BALL TYPE |
| AGGG | BORE CENTER TO SHANK END DISTANCE | 4.7300 INCHES MINIMUM AND 4.7500 INCHES MAXIMUM |
| AGGJ | INNER MEMBER WIDTH | 0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 5.1212 INCHES NOMINAL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions