Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 88755 | Manufacturer : rockwell automation ltd | Item Name: resistor variable nonwire wound |
| NSN: 5905-00-763-2522 (5905007632522) | CAGE Code: 01121 |
If you require part number 88755 from Rockwell Automation Ltd which is described as a Resistor Variable Nonwire Wound component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 88755 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5905007632522 and was produced under the CAGE Code 01121. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 88755 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-763-2522 Item PartTypeName: RESISTOR,VARIABLE,NONWIRE WOUND | 5905 | 007632522 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| JJC88755 | C | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| ABPA | UNDERCUT DIAMETER | 0.063 INCHES NOMINAL |
| ADAV | OVERALL DIAMETER | 1.156 INCHES MAXIMUM |
| AGQL | UNDERCUT LENGTH | 0.550 INCHES NOMINAL |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | 2.766 INCHES NOMINAL |
| ABNC | FLAT HEIGHT | 0.094 INCHES MINIMUM AND 0.216 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 1.156 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.125 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 1.100 INCHES MINIMUM AND 1.500 INCHES MAXIMUM |
| ADAP | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 1.266 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,STEPPED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFP | NONTURN DEVICE RADIUS | 0.531 INCHES NOMINAL |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS 1ST SECTION AND 2.5 KILOHMS 2ND SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| CQPH | DEVICE DESIGN TYPE | NONTURN AT 9 OCLOCK |
| CQTM | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS |
| TEST | TEST DATA DOCUMENT | 95542-138-063 DRAWING THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC. EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TAB,SOLDER LUG |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions