Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : RJR26FP103M | Manufacturer : rockwell collins aerospace | Item Name: resistor variable nonwire wound |
| NSN: 5905-01-229-1298 (5905012291298) | CAGE Code: 13499 |
If you require part number RJR26FP103M from Rockwell Collins Aerospace which is described as a Resistor Variable Nonwire Wound component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number RJR26FP103M which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5905012291298 and was produced under the CAGE Code 13499. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part RJR26FP103M today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-229-1298 Item PartTypeName: RESISTOR,VARIABLE,NONWIRE WOUND | 5905 | 012291298 | N | A | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| S026120891041F2209 | B | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 |
| ABJT | TERMINAL LENGTH | 0.300 INCHES MINIMUM |
| ABWV | SHAFT DIAMETER | 0.075 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.050 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.250 INCHES NOMINAL |
| ADAT | BODY WIDTH | 0.165 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 0.250 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 MINIMUM AND 9000.0 MAXIMUM |
| AEFK | MAXIMUM STARTING TORQUE | 3.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 3.00 INCH-OUNCES |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
| AFJN | FRAGILITY FACTOR | MODERATELY DELICATE |
| AGAV | END ITEM IDENTIFICATION | A/F-18-DCN |
| AXGY | MOUNTING METHOD | TERMINAL |
| CBME | CUBIC MEASURE | 0.010 CUBIC INCHES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 100.000 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 MINIMUM AND 9000.0 MAXIMUM |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| CQTM | TERMINAL LOCATION | REAR END |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0 TO 100.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.25 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 13499-380-1507 DRAWING THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC. EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions