Part No. : D16-625 | Alternate P/N : D16625 | Manufacturer : roller bearing co of america |
Item Name: pin straight headless | NSN: 5315-00-844-2929 (5315008442929) | CAGE Code: 00141 |
FSC: 5315 Nails Machine Keys and Pins |
If you require part number D16-625 from Roller Bearing Co Of America which is described as a Pin Straight Headless component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number D16-625 which is listed under the Federal Supply Class 5315 Nails Machine Keys and Pins. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5315008442929 and was produced under the CAGE Code 00141. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part D16-625 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. D16-625
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5315-00-844-2929 Item Description: Pin Straight Headless | 5315 | 008442929 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
D16-625 | 5 | 1 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAGZ | FIRST END STYLE | CHAMFERED |
AAHP | SECOND END STYLE | RADIUS |
ACHT | PIN OVERALL LENGTH | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
ACHU | PIN OVERALL DIAMETER | 0.0938 INCHES MINIMUM AND 0.0940 INCHES MAXIMUM |
ALWS | SECOND END CORNER RADIUS | 0.008 INCHES MINIMUM AND 0.031 INCHES MAXIMUM |
AMCS | FIRST END TAPER LENGTH | 0.125 INCHES MINIMUM AND 0.148 INCHES MAXIMUM |
CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
CRMG | FIRST END TAPER ANGLE | 4.0 DEGREES MINIMUM AND 12.0 DEGREES MAXIMUM |
FEAT | SPECIAL FEATURES | RADIUS END MAY BE CHAMFERED 25 DEG |
MATT | MATERIAL | STEEL OVERALL |
SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
CSYM | SURFACE FINISH | 16.0 MICROINCHES OUTSIDE DIAMETER |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload