Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : G9-20 | Alternate P/N : G920 | Manufacturer : roller bearing company of america |
| Item Name: gear spur | NSN: 3020-00-727-7968 (3020007277968) | CAGE Code: 00141 |
| FSC: 3020 Gear Pulley Sprocket and Transmission Chain |
If you require part number G9-20 from Roller Bearing Company Of America which is described as a Gear Spur component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number G9-20 which is listed under the Federal Supply Class 3020 Gear Pulley Sprocket and Transmission Chain. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3020007277968 and was produced under the CAGE Code 00141. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part G9-20 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN, SOLID |
| AGJS | PITCH DIAMETER | 0.3125 INCHES NOMINAL |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 56 TRANSVERSELY THROUGH HUB, FIRST END |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| CWFR | NOMINAL OVERALL LENGTH | 0.312 INCHES |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWRM | FACE NOMINAL WIDTH | 0.125 INCHES |
| CWTR | HUB STYLE DESIGNATOR | PINNED FIRST END |
| MATT | III MATERIAL | STEEL COMP 303 OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AJLA | TEETH QUANTITY | 20 |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | 0.086 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| CWCD | NOMINAL OUTSIDE DIAMETER | 0.344 INCHES |
| CWNH | TOOTH FORM | STANDARD |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.187 INCHES FIRST END |
| CWRS | BORE NOMINAL DIAMETER | 0.125 INCHES BOTH ENDS |
| CWTX | HUB NOMINAL DIAMETER | 0.312 INCHES FIRST END |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720,COMP 303S MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions