FJE43-12 by Roller Bearing Company Of America With NSN 3120-00-849-6971

Part No. : FJE43-12	Alternate P/N : FJE4312	Manufacturer : roller bearing company of america
Item Name: bearing plain rod end	NSN: 3120-00-849-6971 (3120008496971)	CAGE Code: 73134
FSC: 3120 Bearings Plain Unmounted

If you require part number FJE43-12 from Roller Bearing Company Of America which is described as a Bearing Plain Rod End component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number FJE43-12 which is listed under the Federal Supply Class 3120 Bearings Plain Unmounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3120008496971 and was produced under the CAGE Code 73134. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part FJE43-12 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.

Please Fill Out Below Form for FJE43-12

Required fields compulsory *

Contact Information

Note : We will not share your information to any third parties.

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms & Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number FJE43-12 with NSN 3120-00-849-6971, 3120-00-849-6971

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3120-00-849-6971 Item PartTypeName: BEARING,PLAIN,ROD END	3120	008496971	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
FJE43-12	5	2	3

Characteristics Data of NSN 3120-00-849-6971, 3120008496971

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3B
AAJF	THREAD DIRECTION	RIGHT-HAND
ABXV	BORE DIAMETER	0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM
AGGF	OUTER MEMBER OUTSIDE DIAMETER	0.7710 INCHES MINIMUM AND 0.8160 INCHES MAXIMUM
AGGH	OUTER MEMBER WIDTH	0.2810 INCHES MINIMUM AND 0.2910 INCHES MAXIMUM
AGGJ	INNER MEMBER WIDTH	0.3700 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM
AGGY	SHANK THREAD LENGTH	0.5000 INCHES NOMINAL
AGHA	INSPECTION HOLE CENTER TO END DISTANCE	0.3130 INCHES NOMINAL
AGHB	SHANK WIDTH ACROSS WRENCH FLATS	0.3750 INCHES NOMINAL
AGKP	STATIC RADIAL LOAD RATING	3130 POUNDS
AWDP	THREAD DIAMETER	0.190 INCHES NOMINAL
CMLP	THREAD QUANTITY PER INCH	32
CQFM	HARDNESS RATING	32.0 ROCKWELL C MINIMUM ROD END BODY
CQFM	HARDNESS RATING	55.0 ROCKWELL C MINIMUM INNER MEMBER
MATT	MATERIAL	STEEL OR STEEL CORROSION RESISTING ROD END BODY
MATT	MATERIAL	STEEL COMP 440C INNER MEMBER
MATT	MATERIAL	STEEL CORROSION RESISTING RACE INSERT
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE INNER MEMBER
SFTT	SURFACE TREATMENT	CADMIUM ROD END BODY
AAZF	SHANK STYLE	INTERNALLY THREADED W/HEXAGON END AND INSPECTION HOLE
ABHP	OVERALL LENGTH	1.4800 INCHES NOMINAL
AGGG	BORE CENTER TO SHANK END DISTANCE	1.0800 INCHES MINIMUM AND 1.1000 INCHES MAXIMUM
MATT	MATERIAL	PLASTIC TETRAFLUOROETHYLENE RACE LINER
STYL	STYLE DESIGNATOR	BALL TYPE
THSD	THREAD SERIES DESIGNATOR	UNF