Part No. : EU24036 | Manufacturer : rolls royce airlines | Item Name: pin shoulder headless |
NSN: 5315-00-602-7533 (5315006027533) | CAGE Code: K0680 | FSC: 5315 Nails Machine Keys and Pins |
If you require part number EU24036 from Rolls Royce Airlines which is described as a Pin Shoulder Headless component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number EU24036 which is listed under the Federal Supply Class 5315 Nails Machine Keys and Pins. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5315006027533 and was produced under the CAGE Code K0680. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part EU24036 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. EU24036
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5315-00-602-7533 Item Description: Pin Shoulder Headless | 5315 | 006027533 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Eu24036 | 6 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAGZ | FIRST END STYLE | CHAMFERED |
AATR | SHANK LENGTH | 0.085 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
AAVH | SHOULDER DIAMETER | 0.215 INCHES MINIMUM AND 0.225 INCHES MAXIMUM |
AAZE | SHANK DIAMETER | 0.1521 INCHES MINIMUM AND 0.1522 INCHES MAXIMUM |
ABHP | OVERALL LENGTH | 0.315 INCHES MINIMUM AND 0.335 INCHES MAXIMUM |
ABPA | UNDERCUT DIAMETER | 0.141 INCHES MINIMUM AND 0.146 INCHES MAXIMUM |
ABPC | UNDERCUT WIDTH | 0.025 INCHES MINIMUM AND 0.055 INCHES MAXIMUM |
ABPD | SECOND UNDERCUT WIDTH | 0.085 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
ABPF | SECOND UNDERCUT DIAMETER | 0.162 INCHES MINIMUM AND 0.167 INCHES MAXIMUM |
AMCS | FIRST END TAPER LENGTH | 0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM |
CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
CQFM | HARDNESS RATING | 30.0 ROCKWELL C MINIMUM OVERALL AND 34.0 ROCKWELL C MAXIMUM OVERALL |
CQTR | SECOND SHANK DIAMETER | 0.1724 INCHES MINIMUM AND 0.1729 INCHES MAXIMUM |
CRDY | FIRST END LOCATION | BOTH ENDS |
CRMG | FIRST END TAPER ANGLE | 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM |
CWAS | SECOND SHANK LENGTH | 0.090 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
STYL | STYLE DESIGNATOR | UNDERCUT |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload