23038689-1 by Rolls Royce Corporation With NSN 4720-01-329-7256

Part No. : 23038689-1	Alternate P/N : 230386891	Manufacturer : rolls royce corporation
Item Name: hose assembly nonmetallic	NSN: 4720-01-329-7256 (4720013297256)	CAGE Code: 63005

If you require part number 23038689-1 from Rolls Royce Corporation which is described as a Hose Assembly Nonmetallic component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 23038689-1 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 4720013297256 and was produced under the CAGE Code 63005. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 23038689-1 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.

Please Fill Out Below Form for 23038689-1

Required fields compulsory *

Contact Information

Note : We will not share your information to any third parties.

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms & Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number 23038689-1 with NSN 4720-01-329-7256, 4720-01-329-7256

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
4720-01-329-7256 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC	4720	013297256	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
23038689	2	9	D

Characteristics Data of NSN 4720-01-329-7256, 4720013297256

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3B 1ST END
AAJD	THREAD CLASS	3B 2ND END
AAJF	THREAD DIRECTION	RIGHT-HAND 1ST END
AARX	INSIDE DIAMETER	1.239 INCHES NOMINAL
ABKV	OUTSIDE DIAMETER	1.560 INCHES NOMINAL
AGAV	END ITEM IDENTIFICATION	GENERAL MOTORS,ALLISON GAS TURBINE DIV,GENERATOR SET,501K
AHNC	CONNECTION STYLE	SWIVEL NUT FLARE 1ST END
AKUU	END CONNECTION DESIGN	ELBOW 2ND END
AKUU	END CONNECTION DESIGN	STRAIGHT 1ST END
AWLS	CONNECTION TYPE	THREADED INTERNAL TUBE 2ND END
CQCS	LAYER COMPOSITION AND LOCATION	1ST LAYER SPIRALLY WRAPPED POLYTETRAFLUOROETHYLENE IMPREGNATED GLASS FIBER AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
CQRB	SEAT ANGLE	37.0 DEGREES 1ST END
CRDW	HYDROSTATIC TEST PRESSURE	2000.0 POUNDS PER SQUARE INCH
CRFY	FLOW ANGLE	90.0 DEGREES 2ND END
ABJH	TEMP RATING	-65.0 DEG FAHRENHEIT AND 400.0 DEG FAHRENHEIT SINGLE RESPONSE
ACKH	MINIMUM INSIDE BENDING RADIUS	3.500 INCHES
AWLS	CONNECTION TYPE	THREADED INTERNAL TUBE 1ST END
CMLP	THREAD QUANTITY PER INCH	12 2ND END
CQBD	BURST TEST PRESSURE	4000.0 POUNDS PER SQUARE INCH
AAGR	CROSS-SECTIONAL SHAPE STYLE	ROUND
AAJF	THREAD DIRECTION	RIGHT-HAND 2ND END
AHNC	CONNECTION STYLE	SWIVEL NUT FLARE 2ND END
CQGM	MAXIMUM OPERATING PRESSURE	1000.0 POUNDS PER SQUARE INCH
CQJX	NOMINAL THREAD SIZE	1.625 INCHES 1ST END
THSD	THREAD SERIES DESIGNATOR	UN 1ST END
THSD	THREAD SERIES DESIGNATOR	UN 2ND END
CQJX	NOMINAL THREAD SIZE	1.625 INCHES 2ND END
CMLP	THREAD QUANTITY PER INCH	12 1ST END
CQRB	SEAT ANGLE	37.0 DEGREES 2ND END
CRJM	OUTER COVERING ENVIRONMENTAL PROTECTION	CORROSION RESISTANT
CRWL	INSIDE SURFACE CONDITION	CONVOLUTED
CRXX	MEASURING METHOD AND LENGTH	20.000 INCHES NOMINAL WORKING

Related NSN Componets for 23038689-1

230 0 001	230-0-001	230-0-001 ITEM NO.5	230-0-001 ITEM NO.7
230-0-001 REV B IEM NO.11	230-0-001 REV B ITEM NO.10	230-0-001 REV B ITEM NO.16	230-0-001 REV B ITEM NO.17
230-0-001 REV B ITEM NO.18	230-0-001 REV B ITEM NO.19	230-0-001 REV B ITEM NO.2	230-0-001 REV B ITEM NO.20
230-0-001 REV B ITEM NO.21	230-0-001 REV B ITEM NO.22	230-0-001 REV B ITEM NO.23	230-0-001 REV B ITEM NO.24
230-0-001 REV B ITEM NO-25	230-0-001 REV B ITEM NO.26	230-0-001 REV B ITEM NO.27	230-0-001 REV B ITEM NO-28
230-0-001 REV E ITEM NO. 35	230 0 001 REV E ITEM NO 57	230 0 002 REV ITEM NO 4	230-0-010
230-0-010 ITEM NO.1	230-0-011 ITEM 6	230-0-012	230-0-012 ITEM NO. 1
230-0.015-T	230-0-031	230-0.062-T-1	230-0-10MADC
230-00	230-00	230-00-226	230-000-001-603