Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 40251 | Manufacturer : rubbercraft corporation | Item Name: gasket |
| NSN: 5330-00-862-9288 (5330008629288) | CAGE Code: 98159 |
If you require part number 40251 from Rubbercraft Corporation which is described as a Gasket component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 40251 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5330008629288 and was produced under the CAGE Code 98159. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 40251 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5330-00-862-9288 Item PartTypeName: GASKET | 5330 | 008629288 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 114DS558-1 | 6 | 2 | 7 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT |
| ABVL | APERTURE DIAMETER | 2.995 INCHES MINIMUM AND 3.005 INCHES MAXIMUM |
| ANYN | ELONGATION PERCENTAGE | 250 MAXIMUM |
| FEAT | SPECIAL FEATURES | MTG HOLE LOCATION,2 HOLES 1.250 IN. EITHER SIDE OF HORIZONTAL CENTERLINE AND 1.875 IN. FROM VERTICAL CENTERLINE,APERTURE SLOTTED ON RIGHT SIDE ONHORIZONTAL CENTERLINE W/CENTER 1.750 IN. FROM VERTICAL CENTERLINE AND 0.380IN. END RADIUS,ONE A |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 OVERALL AND RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL |
| SFTT | SURFACE TREATMENT | CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAUB | HOLE DIAMETER | 0.343 INCHES MINIMUM AND 0.351 INCHES MAXIMUM |
| ABKG | BOLT CIRCLE DIAMETER | 4.375 INCHES MINIMUM AND 4.385 INCHES MAXIMUM |
| ADVM | CROSS-SECTIONAL THICKNESS | 0.125 INCHES NOMINAL |
| CQFM | HARDNESS RATING | 70.0 SHORE DUROMETER A NOMINAL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-327 T6 FED SPEC 1ST MATERIAL RESPONSE OVERALL AND MIL-R-7362 TY 2 COMP A MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR SR 873A-70 FSCM 95272 MFR REF 2ND MATERIAL RESPONSE OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions