Part No. : M81934 2-16C020 | Alternate P/N : M81934216C020 | Manufacturer : sae international |
Item Name: bearing sleeve | NSN: 3120-01-343-1015 (3120013431015) | CAGE Code: 0U583 |
If you require part number M81934 2-16C020 from Sae International which is described as a Bearing Sleeve component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number M81934 2-16C020 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3120013431015 and was produced under the CAGE Code 0U583. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part M81934 2-16C020 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. M81934 2-16C020
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3120-01-343-1015 Item Description: Bearing Sleeve | 3120 | 013431015 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
M81934 2-16c020 | 1 | 9 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
SLEEVE | ABHP | OVERALL LENGTH0 6725 INCHES MINIMUM AND 0 6875 INCHES MAXIMUM |
SLEEVE | FEAT | SPECIAL FEATURESPLASTIC LINER BONDED TO LEFT END SURFACE OF FLANGE |
SLEEVE | MATT | MATERIALPLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER |
SLEEVE | AGFF | FLANGE WIDTH0 0575 INCHES MINIMUM AND 0 0625 INCHES MAXIMUM |
SLEEVE | CSYM | SURFACE FINISH125 0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY |
SLEEVE | AEPR | FLANGE OUTSIDE DIAMETER1 7300 INCHES MINIMUM AND 1 7500 INCHES MAXIMUM |
SLEEVE | ADAR | BODY OUTSIDE DIAMETER1 1893 INCHES MINIMUM AND 1 1898 INCHES MAXIMUM |
SLEEVE | ADAS | BODY INSIDE DIAMETER1 0005 INCHES MINIMUM AND 1 0015 INCHES MAXIMUM |
SLEEVE | BZLX | CORNER SHAPESQUARE INSIDE LEFT CORNER |
SLEEVE | MDCL | MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OUTER LAYER |
SLEEVE | STYL | STYLE DESIGNATORSOLID EXTERNAL FLANGE ONE END |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload