Part No. : 3M926-5L8 | Alternate P/N : 3M9265L8 | Manufacturer : saturn fasteners inc |
Item Name: screw close tolerance | NSN: 5305-01-105-7222 (5305011057222) | CAGE Code: 0K6Z0 |
FSC: 5305 Screws |
If you require part number 3M926-5L8 from Saturn Fasteners Inc which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 3M926-5L8 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305011057222 and was produced under the CAGE Code 0K6Z0. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 3M926-5L8 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 3M926-5L8
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-105-7222 Item Description: Screw Close Tolerance | 5305 | 011057222 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
3m926-5l8 | 2 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
CLOSE TOLERANCE | THSD | THREAD SERIES DESIGNATORUNJF |
CLOSE TOLERANCE | AAJD | THREAD CLASS3A |
CLOSE TOLERANCE | AAJF | THREAD DIRECTIONRIGHT-HAND |
CLOSE TOLERANCE | AASA | THREAD LENGTH0 506 INCHES MINIMUM AND 0 556 INCHES MAXIMUM |
CLOSE TOLERANCE | AASB | FASTENER LENGTH1 016 INCHES MINIMUM AND 1 046 INCHES MAXIMUM |
CLOSE TOLERANCE | AASK | HEAD STYLEFLAT COUNTERSUNK |
CLOSE TOLERANCE | AASL | HEAD DIAMETER0 429 INCHES MINIMUM AND 0 477 INCHES MAXIMUM |
CLOSE TOLERANCE | AAUR | GRIP DIAMETER0 3110 INCHES MINIMUM AND 0 3120 INCHES MAXIMUM |
CLOSE TOLERANCE | ABQZ | INTERNAL DRIVE STYLEHIGH-TORQUE |
CLOSE TOLERANCE | AHYM | NOMINAL THREAD DIAMETER0 312 INCHES |
CLOSE TOLERANCE | ANEE | GRIP LENGTH0 490 INCHES MINIMUM AND 0 510 INCHES MAXIMUM |
CLOSE TOLERANCE | CMLP | THREAD QUANTITY PER INCH24 |
CLOSE TOLERANCE | CRSQ | COUNTERSINK ANGLE101 0 DEGREES NOMINAL |
CLOSE TOLERANCE | MATT | MATERIALSTEEL COMP XM-13 OVERALL |
CLOSE TOLERANCE | MDCL | MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
CLOSE TOLERANCE | SFTT | SURFACE TREATMENTALUMINUM OVERALL AND CHROMATE OVERALL |
CLOSE TOLERANCE | STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-83488 TY 2 CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload