Part No. : 13015980 | Manufacturer : schaeffler group usa inc | Item Name: bearing ball thrust |
NSN: 3110-01-610-3791 (3110016103791) | CAGE Code: 0AJV0 | FSC: 3110 Bearings Antifriction Unmounted |
If you require part number 13015980 from Schaeffler Group Usa Inc which is described as a Bearing Ball Thrust component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 13015980 which is listed under the Federal Supply Class 3110 Bearings Antifriction Unmounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3110016103791 and was produced under the CAGE Code 0AJV0. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 13015980 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 13015980
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3110-01-610-3791 Item Description: Bearing Ball Thrust | 3110 | 016103791 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
13015980 | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
ABKW | OVERALL HEIGHT | 0.6200 INCHES MINIMUM AND 0.6300 INCHES MAXIMUM |
ADGA | OVERALL OUTSIDE DIAMETER | 1.7790 INCHES MINIMUM AND 1.7810 INCHES MAXIMUM |
AGAV | END ITEM IDENTIFICATION | 1015-01-598-4568 |
AGWJ | BORE SMALLEST DIAMETER | 1.0040 INCHES MINIMUM AND 1.0060 INCHES MAXIMUM |
AGWK | LARGEST BORE DIAMETER | 1.0313 INCHES MINIMUM |
AGYE | SURFACE FINISH | GROUND |
AGYF | RETAINER FABRICATION METHOD | MACHINED |
AGZA | ALIGNMENT TYPE | RIGID |
AGZQ | THRUST DIRECTIONAL CAPABILITY DESIGNATION | SINGLE |
CTFZ | STANDARD TOLERANCE DESIGNATION | AFBMA STD TOLERANCE FOR THRUST BEARINGS |
CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BEARING,THRUST |
FEAT | SPECIAL FEATURES | ROLLER BEARING IS HEAT TREATED THROUGH HARDENED ROCKWELL C58 TO C64; SURFACE FINISH IAW CID A-A-52491 |
MATT | MATERIAL | STEEL COMP E51100 OR STEEL COMP E52100 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE-AMS-STD-66 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL |
STYL | STYLE DESIGNATOR | GROOVED RACE SURFACE |
SUPP | SUPPLEMENTARY FEATURES | BASIC STATIC LOAD RATING AT 5300 LBS AND DYNMAIC LOAD RATING AT 1184 LBS |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload