| Part No. : 303657 | Manufacturer : scott huber essick | Item Name: shaft axle automotive |
| NSN: 2520-00-355-2408 (2520003552408) | CAGE Code: 99832 | FSC: 2520 Vehicle Power Transmission Components |
If you require part number 303657 from Scott Huber Essick which is described as a Shaft Axle Automotive component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 303657 which is listed under the Federal Supply Class 2520 Vehicle Power Transmission Components. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 2520003552408 and was produced under the CAGE Code 99832. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 303657 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2520-00-355-2408 Item PartTypeName: SHAFT,AXLE,AUTOMOTIVE | 2520 | 003552408 | P | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 303657 | 2 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 21.812 INCHES NOMINAL |
| ACLL | FIRST END THREAD DIRECTION | RIGHT-HAND |
| AETC | METALLIC HARDNESS RATING | 270.0 MINIMUM BRINELL STANDARD AND 320.0 MAXIMUM BRINELL STANDARD |
| AMCP | FIRST END TAPER | 1.500 INCHES NOMINAL PER FOOT |
| AMCR | FIRST END TAPER MAJOR DIAMETER | 0.363 INCHES MINIMUM AND 0.364 INCHES MAXIMUM |
| AMCZ | FIRST END KEYWAY WIDTH | 0.749 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| AMDG | FIRST END KEYWAY DEPTH | 0.421 INCHES MINIMUM AND 0.426 INCHES MAXIMUM |
| AMEL | FIRST END BEARING SEAT DIAMETER | 0.363 INCHES MINIMUM AND 0.365 INCHES MAXIMUM |
| AMEP | FIRST END DISTANCE FROM BEARING SEAT TO END | 9.375 INCHES NOMINAL |
| AMFR | SECOND END KEYWAY WIDTH | 0.749 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| AMFT | SECOND END KEYWAY DEPTH | 0.562 INCHES NOMINAL |
| AMHL | SECOND END BEARING SEAT DIAMETER | 4.250 INCHES NOMINAL |
| AMHM | SECOND END DISTANCE FROM BEARING SEAT TO END | 6.752 INCHES MINIMUM AND 6.758 INCHES MAXIMUM |
| AMQA | FIRST END TYPE | TAPERED |
| AMQF | SECOND END TYPE | PLAIN |
| AQSQ | FIRST END THREAD SIZE | 1.750-5 |
| ATKT | FIRST END THREAD SERIES | UNC |
| BNPK | SECOND END FACILITY DIAMETER | 3.753 INCHES MINIMUM AND 3.754 INCHES MAXIMUM |
| BNTF | FIRST END BEARING SEAT | INCLUDED |
| BNTG | FIRST END BEARING SEAT WIDTH | 3.125 INCHES NOMINAL |
| BNTQ | SECOND END ENGAGING/LOCKING/POSITIONING FACILITY | SHOULDER |
| BNTR | SECOND END FACILITY WIDTH | 2.997 INCHES MINIMUM AND 3.000 INCHES MAXIMUM |
| BNTS | SECOND END FACILITY LOCATION | 3.750 IN. FROM SHAFT END |
| BNTT | SECOND END BEARING SEAT | INCLUDED |
| BNTW | SECOND END BEARING SEAT WIDTH | 2.557 INCHES MINIMUM AND 2.567 INCHES MAXIMUM |
| BNYZ | FIRST END PIN HOLE DIAMETER | 0.406 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | SECOND END 3.501 IN. MIN,3.502 IN. MAX DIA,3.625 IN. LG,GROUND,GROOVE 0.125 IN. W,3.348 IN. DIA BETWEEN SECOND END AND SHOULDER AND GROOVE 0.125 IN. W,3.688 IN. DIA BETWEEN SHOULDER AND BEARING SURFACE |
| MATT | MATERIAL | STEEL COMP 4140 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 4140 ASSN STD SINGLE MATERIAL RESPONSE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload