Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : H060 | Manufacturer : sensor systems inc | Item Name: resistor variable nonwire wound |
| NSN: 5905-00-789-5927 (5905007895927) | CAGE Code: 04454 |
If you require part number H060 from Sensor Systems Inc which is described as a Resistor Variable Nonwire Wound component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number H060 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5905007895927 and was produced under the CAGE Code 04454. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part H060 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-789-5927 Item PartTypeName: RESISTOR,VARIABLE,NONWIRE WOUND | 5905 | 007895927 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 752-6232 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 0.9688 INCHES MAXIMUM |
| ABNB | FIRST FLAT LENGTH | 0.377 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.969 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |
| ABPM | BODY DIAMETER | 1.062 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.437 INCHES NOMINAL |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.0 KILOHMS 7TH SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 7.5 KILOHMS 2ND SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 7.5 KILOHMS 4TH SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25 TO 0.25 1ST SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00 TO 1.00 2ND SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.50 TO 1.50 6TH SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 ALL SECTIONS |
| TEST | TEST DATA DOCUMENT | 97942-577R900 DRAWING THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC. EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| AAPN | SECTION QUANTITY | 7 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| ABNC | FLAT HEIGHT | 0.104 INCHES MINIMUM AND 0.106 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.1242 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 1.880 INCHES NOMINAL |
| AECZ | MOUNTING LIP DIAMETER | 1.0620 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,FLATTED |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS 1ST SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS 5TH SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS 6TH SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 40.0 KILOHMS 3RD SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.65 TO 0.65 3RD SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00 TO 1.00 4TH SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.50 TO 1.50 5TH SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -2.00 TO 2.00 7TH SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR ALL SECTIONS |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE CONFORMITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS EQUATION |
| TTQY | TERMINAL TYPE AND QUANTITY | 30 TURRET |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions