Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 23W4-1720 | Alternate P/N : 23W41720 | Manufacturer : servo instrument corporation |
| Item Name: resistor variable wire wound non | NSN: 5905-01-067-2937 (5905010672937) | CAGE Code: 19176 |
| FSC: 5905 Resistors |
If you require part number 23W4-1720 from Servo Instrument Corporation which is described as a Resistor Variable Wire Wound Non component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 23W4-1720 which is listed under the Federal Supply Class 5905 Resistors. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5905010672937 and was produced under the CAGE Code 19176. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 23W4-1720 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-067-2937 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 010672937 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | G | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 23W4-1720 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 1.3125 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 1.437 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0730 INCHES MINIMUM |
| ABPM | BODY DIAMETER | 1.442 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.2497 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.625 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 2.166 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 1.4370 INCHES NOMINAL |
| AEDA | MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND |
| AEDZ | SHAFT BEARING TYPE | BEARING |
| AEFD | ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 349.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 3.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 2.00 INCH-OUNCES |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 1.081 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 145.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 55.0 SINGLE SECTION |
| PMLC | PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES GOLD |
| PRMT | PRECIOUS MATERIAL | GOLD |
| TEST | TEST DATA DOCUMENT | 18876-10243519 DRAWING THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC. EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TURRET |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions