Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : S10-10-6315 | Alternate P/N : S10106315 | Manufacturer : sikorsky aircraft corporation |
| Item Name: nut plain cap | NSN: 5310-00-197-7013 (5310001977013) | CAGE Code: 78286 |
| FSC: 5310 Nuts and Washers |
If you require part number S10-10-6315 from Sikorsky Aircraft Corporation which is described as a Nut Plain Cap component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number S10-10-6315 which is listed under the Federal Supply Class 5310 Nuts and Washers. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5310001977013 and was produced under the CAGE Code 78286. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part S10-10-6315 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-00-197-7013 Item PartTypeName: NUT,PLAIN,CAP | 5310 | 001977013 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| IP7013 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ACTA | NUT STYLE | CAP |
| ADEA | NUT HEIGHT | 0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM |
| AGGP | DRILLED HOLE DIAMETER | 0.0625 INCHES NOMINAL |
| ALET | HOLE TYPE AND QUANTITY | 1 DRILLED |
| ASDB | WIDTH ACROSS FLATS | 1.094 INCHES MINIMUM AND 1.156 INCHES MAXIMUM |
| BZRR | THREAD SERIES | UNEF |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQJX | NOMINAL THREAD SIZE | 0.688 INCHES |
| CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION A |
| CRSQ | COUNTERSINK ANGLE | 89.5 DEGREES MINIMUM NUT AND 90.5 DEGREES MAXIMUM NUT |
| CRTM | BEARING SURFACE TYPE | CHAMFERED OR WASHER FACED |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-354 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | ANODIZE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-A-696 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions