Part No. : 2-57-1833-30-00 | Alternate P/N : 25718333000 | Manufacturer : simmons fastener corp |
Item Name: catch clamping | NSN: 5340-01-303-3068 (5340013033068) | CAGE Code: 82240 |
FSC: 5340 Hardware Commercial |
If you require part number 2-57-1833-30-00 from Simmons Fastener Corp which is described as a Catch Clamping component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 2-57-1833-30-00 which is listed under the Federal Supply Class 5340 Hardware Commercial. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5340013033068 and was produced under the CAGE Code 82240. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 2-57-1833-30-00 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 2-57-1833-30-00
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5340-01-303-3068 Item Description: Catch Clamping | 5340 | 013033068 | 0 | P | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
2-57-1833-30-00 | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAUB | HOLE DIAMETER | 0.129 INCHES MINIMUM AND 0.136 INCHES MAXIMUM |
ABXG | OVERALL LENGTH | 1.900 INCHES NOMINAL |
APGF | DESIGN TYPE | CLAW ENGAGING |
ASXK | HOLE QUANTITY | 2 |
CJMH | ENGAGING SURFACE WIDTH | 0.677 INCHES MINIMUM AND 0.697 INCHES MAXIMUM |
CJMM | CATCH WIDTH | 0.927 INCHES MINIMUM AND 0.947 INCHES MAXIMUM |
CJMN | WING NUT WIDTH | 1.500 INCHES NOMINAL |
CTHX | OVERALL HEIGHT | 0.420 INCHES NOMINAL |
MATT | MATERIAL | STEEL COMP 4130 OVERALL |
SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
STYL | STYLE DESIGNATOR | SPECIAL |
APHE | OPERATION METHOD | OUTSIDE LATCH |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC ALL TREATMENT RESPONSES OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload