Part No. : 3516AS6120-31 | Alternate P/N : 3516AS612031 | Manufacturer : simula safety systems inc |
Item Name: manualoverriderel | NSN: 1670-01-502-9463 (1670015029463) | CAGE Code: 05DK2 |
FSC: 1670 Parachutes Aerial Pick Up Delivery Recovery Systems and Cargo Tie Down Equipment |
If you require part number 3516AS6120-31 from Simula Safety Systems Inc which is described as a Manualoverriderel component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 3516AS6120-31 which is listed under the Federal Supply Class 1670 Parachutes Aerial Pick Up Delivery Recovery Systems and Cargo Tie Down Equipment. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 1670015029463 and was produced under the CAGE Code 05DK2. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 3516AS6120-31 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 3516AS6120-31
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
1670-01-502-9463 Item Description: Manualoverriderel | 1670 | 015029463 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
3516as6120-31 | 5 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
CRTL | Criticality Code Justification | AGAV |
ABHP | Overall Length | 2.130 INCHES NOMINAL |
FEAT | Special Features | QMATL IS 0.020 IN. THICK CRES 17-7PH IAW AMS 5528, ANNEALED AND HEAT TREATED IAW AMS 2759/3, RH950, FORMED FROM FLAT 90 DEGREE TRIANGULAR STOCK WITH LEGS ROUNDED, 1ST LEG IS 3.030 IN. LONG BEFORE LOOPING BACK AND 2.130 IN. LONG AFTER LOOPING WITH RADIUS OF 0.160 IN, LEG BENDS UPWARD FROM LOOP TO 33 DEG. ANGLE FROM BASE, 0.290 IN. FROM LOOPED END; 2ND LEG IS 2.700 IN. LONG BEFORE LOOPING, 1.750 IN. AFTER, THIS LEG BENDS UPWARD TO 33 DEG. ANGLE, 0.350 IN. FROM LOOPED END |
MRC | Decoded Requirement | Clear Text Reply |
AGAV | End Item Identification | PRE-PROVISIONING FOR WHICH NAVICP PHIL ACTS AS POE; AIRCRAFT |
CXCY | Part Name Assigned By Controlling Agency | MANUAL OVERFIDE RELEASE HANDLE CLIP |
ABMK | Overall Width | 1.750 INCHES NOMINAL |
MATT | Material | STEEL CORROSION RESISTING |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload