Part No. : SY2-7 16TM | Alternate P/N : SY2716TM | Manufacturer : skf usa inc |
Item Name: bearing unit ball | NSN: 3130-01-197-1620 (3130011971620) | CAGE Code: 52676 |
FSC: 3130 Bearings Mounted |
If you require part number SY2-7 16TM from Skf Usa Inc which is described as a Bearing Unit Ball component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number SY2-7 16TM which is listed under the Federal Supply Class 3130 Bearings Mounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3130011971620 and was produced under the CAGE Code 52676. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part SY2-7 16TM today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. SY2-7 16TM
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3130-01-197-1620 Item Description: Bearing Unit Ball | 3130 | 011971620 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Sy2-7 16tm | 5 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
ABTB | MOUNTING HOLE DIAMETER | 0.6250 INCHES NOMINAL |
ABXV | BORE DIAMETER | 2.4375 INCHES NOMINAL |
ACYB | BASE THICKNESS | 1.0000 INCHES NOMINAL |
ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 7.0625 INCHES MINIMUM AND 7.9375 INCHES MAXIMUM |
AFWC | HOUSING HEIGHT | 5.5000 INCHES NOMINAL |
AFWD | HOUSING LENGTH | 1.7500 INCHES NOMINAL |
AFWE | HOUSING WIDTH | 9.5000 INCHES NOMINAL |
AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
AGNF | BASE LENGTH | 2.5000 INCHES NOMINAL |
AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
AGZA | ALIGNMENT TYPE | RIGID |
AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
AHZC | ASSEMBLY OVERALL LENGTH | 2.5625 INCHES NOMINAL |
AMCL | BLOCK TYPE | FIXED |
ANJS | SHAFT END TYPE | CLOSED OR OPEN |
ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 2.6875 INCHES NOMINAL |
CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 45.0 DEGREES NOMINAL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload