Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : LD111-0045-2418 | Alternate P/N : LD11100452418 | Manufacturer : sonic industries inc |
| Item Name: screw close tolerance | NSN: 5305-01-452-1662 (5305014521662) | CAGE Code: 57928 |
| FSC: 5305 Screws |
If you require part number LD111-0045-2418 from Sonic Industries Inc which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number LD111-0045-2418 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305014521662 and was produced under the CAGE Code 57928. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part LD111-0045-2418 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-452-1662 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 014521662 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| LD111-0045-2418 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | Thread Class | 3A |
| FEAT | Special Features | OVERSIZE GRIP DIA |
| AHYM | Nominal Thread Diameter | 0.250 INCHES |
| AASK | Head Style | FLAT COUNTERSUNK |
| ANEE | Grip Length | 1.125 INCHES NOMINAL |
| MRC | Decoded Requirement | Clear Text Reply |
| AASA | Thread Length | 0.397 INCHES NOMINAL |
| ABQZ | Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| AASL | Head Diameter | 0.464 INCHES MINIMUM AND 0.506 INCHES MAXIMUM |
| AASB | Fastener Length | 1.507 INCHES MINIMUM AND 1.537 INCHES MAXIMUM |
| SFTT | Surface Treatment | PASSIVATE OVERALL |
| AAJF | Thread Direction | RIGHT-HAND |
| THSD | Thread Series Designator | UNJF |
| AAUR | Grip Diameter | 0.2646 INCHES MINIMUM AND 0.2651 INCHES MAXIMUM |
| CMLP | Thread Quantity Per Inch | 28 |
| STDC | Surface Treatment Document And Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| MATT | Material | STEEL COMP XM-13 OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions