Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : LD111-0045-2308 | Alternate P/N : LD11100452308 | Manufacturer : sonic industries inc |
| Item Name: screw close tolerance | NSN: 5305-01-452-7322 (5305014527322) | CAGE Code: 57928 |
| FSC: 5305 Screws |
If you require part number LD111-0045-2308 from Sonic Industries Inc which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number LD111-0045-2308 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305014527322 and was produced under the CAGE Code 57928. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part LD111-0045-2308 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-452-7322 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 014527322 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| LD111-0045-2308 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.331 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 0.816 INCHES MINIMUM AND 0.846 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.339 INCHES MINIMUM AND 0.381 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.2021 INCHES MINIMUM AND 0.2026 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| ANEE | GRIP LENGTH | 0.500 INCHES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| FEAT | SPECIAL FEATURES | OVERSIZE GRIP DIA |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions