Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 905591 | Manufacturer : spalla inc | Item Name: shaft axle automotive |
| NSN: 2520-00-626-6597 (2520006266597) | CAGE Code: 22852 |
If you require part number 905591 from Spalla Inc which is described as a Shaft Axle Automotive component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 905591 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 2520006266597 and was produced under the CAGE Code 22852. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 905591 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2520-00-626-6597 Item PartTypeName: SHAFT,AXLE,AUTOMOTIVE | 2520 | 006266597 | P | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 809H89 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUB | HOLE DIAMETER | 0.438 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 26.531 INCHES MINIMUM AND 26.656 INCHES MAXIMUM |
| ABUJ | THREAD SIZE | 3/8-16 |
| AETC | METALLIC HARDNESS RATING | 25.0 MINIMUM ROCKWELL C AND 60.0 MAXIMUM ROCKWELL C |
| AHTC | FLANGE OUTSIDE DIAMETER | 4.745 INCHES MINIMUM AND 4.750 INCHES MAXIMUM |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC |
| AMGA | SECOND END SPLINE LENGTH | 1.350 INCHES MINIMUM AND 1.352 INCHES MAXIMUM |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 1.136 INCHES MINIMUM AND 1.141 INCHES MAXIMUM |
| AMQA | FIRST END TYPE | FLANGED |
| AMQF | SECOND END TYPE | SPLINED |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 2 THREADED HOLE AND 6 UNTHREADED HOLE |
| BBCF | SECOND END SPLINE QUANTITY | 10 |
| BNTF | FIRST END BEARING SEAT | NOT INCLUDED |
| BNTM | SECOND END SPLINE TYPE | STRAIGHT |
| BNTQ | SECOND END ENGAGING/LOCKING/POSITIONING FACILITY | LOCKING DEVICE GROOVE |
| BNTR | SECOND END FACILITY WIDTH | 0.250 INCHES NOMINAL |
| BNTS | SECOND END FACILITY LOCATION | LOCATED AT SHAFT END |
| BNTT | SECOND END BEARING SEAT | NOT INCLUDED |
| BNYS | FLANGE OVERALL THICKNESS | 0.812 INCHES NOMINAL |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | 0.438 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | 1-1/4 IN. DIA OF PORTION OF SHAFT BETWEEN FLANGE AND SPLINE END |
| MATT | MATERIAL | STEEL COMP 4063 OR STEEL COMP 1045 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624,FS4063-CANCELED FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-633,FS1045-CANCELED FED SPEC 2ND MATERIAL RESPONSE |
| ZZZV | FSC APPLICATION DATA | CONTROLLED DIFFERENTIAL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions